Zigbee wall dimmer Touch - in the twinkling of an eye to your own lighting creation

Control your LED light installations cleverly in the glass design and tune your LEDs individually according to your wishes. Here you benefit from a user-friendly interface behind which a variety of smart functions slumber. The wall dimmer Touch is suitable for the operation of white as well as colored LED light strips, LED built-in spotlights, LED panels and other dimmable lamps and lights.

Compatible Zigbee coordinators

Our wall dimmer communicates via Zigbee and thus addresses many coordinators such as Philips Hue. Pairing with the Philips Hue Bridge gives you a comprehensive and orderly integration of many LED lamps. Other coordinators following the Zigbee standard are also possible. We cannot guarantee the operation. Please contact the manufacturer of the respective coordinator.

• Amazon Echo Dot (from 4th generation)

• Osram Lightify

• Google Assistant

• and many more

Stepless dimming

The brightness can be freely selected between 0.1% and 100% via the dimming icon. You can dim all three colors brighter or darker at the same time. The brightness changes only for the three colors. Once you have found your perfect brightness, you can save it permanently.

Find individual color tones

Create a feel-good oasis with your own color accents and bring warmth into your living space in an artistic way. The individual color of the LEDs per zone is set by selecting a mixed color in the touch-sensitive touch color wheel. Optionally, the color mix works with the help of the separate control panels R G B W for the individual colors red, green, blue and white. A colorful variety is offered by 10 pre-installed color change programs, whose sequence speed is adjustable and only available for the Color & White variant.

Up to 4 zones controllable

The control is possible synchronously as well as individually for up to 4 zones. So you can control single zones separately or all zones at the same time. Integrate any number of LED systems per zone and operate them synchronously.

The wall dimmer used decides dynamically during use in which operating mode the radio controller or DMX decoder works.

Memory function

Switching on/off is slightly delayed without flickering and is therefore easy on the eyes. Each time it is switched on, the last set lighting situation is restored.

Sufficient range

The operation with a Zigbee controller is guaranteed thanks to the decent range. This is up to 30m, depending on the nature of the room, and thus allows flexible lighting control. The wall dimmer operates in the approved frequency band 2.4 GHz and receives its power supply via cable.

Available functions

LED design by Zigbee offers you many advantages and possibilities. Thanks to the right combination of LED controller and this wall dimmer, no wishes remain unfulfilled. However, there are also limitations that need to be considered:

5146.111 / 5146.141 Zigbee wall dimmer touch for white LEDs

5146.241 Zigbee wall dimmer Touch for Ambience LEDs

5146.511 / 5146.541 Zigbee wall dimmer Touch for Color & Ambience LEDs

Dim = with dimming function / Sw = switch on and off / W-Mix = mixing of white tones / Mix = mixing of color tones

Rounded in noble glass

Our Zigbee wall dimmer Touch scores visually with its timeless design and a backlight. What used to be an annoying habit at the simple light switch now turns out to be a stylish and pleasant lighting design. The glass surface gives you user-friendly access to all functions via touch function.

The iluminize Zigbee network

A control via Zigbee network expands your LED lighting design many times over. Here, capable lamps and luminaires are integrated into your smart home in order to be able to assign and configure them as desired. For example, you can integrate up to 30 LED controllers and actuators including their lights and control them with a robust radio frequency of 2.4GHz.

The flexible wall dimmer can be paired either directly with a compatible controller (see table) or via app. You may also connect several wall dimmers to one controller and in this way operate different LED light strips separately.

Installation & scope of delivery

The Touch R radio wall dimmer is connected directly to 230V and therefore requires neither batteries nor drivers. Given the protection class of IP20, the operation is intended for indoor use only.

It is intended for wall mounting and can also be installed in common flush-mounted switch boxes. Due to the external dimension of 86mm, it is not suitable for mounting in multiple flush-mounted boxes in standard spacing, also not in combination with standard switch frames.

In the scope of delivery you will find:

• 1 x Zigbee wall dimmer Touch

• 2 x screws

• 1 x instruction manual