Power repeater PWM 12V - 36V | White
Extend the length of LED strip lights without losing power and increase your options.
For this you only need this power repeater which is connected to a suitable LED controller by cable. The PWM signal is amplified in this way.
Our power repeater is also compatible with external LED controllers and also supports KNX, DMX or DALI. However, please make sure that the LED controller to be supported operates at a constant voltage between 12V-36V and outputs a PWM signal below 10 KHz.
Delivery and shipping costs details *
Currently no delivery date can be given.
Only pickup at our warehouse is possible!
No shipping rule found. Please contact our customer support.
We ship this product to the following countries (pickup for EU citizens of all countrys possible):
| Documents for download | ||
|---|---|---|
| Manual 5915 |
|
|
| 5915 - Connection to LED strip light Ambience |
|
|
iluminize power amplifier - for extended operation of LED light strips
With this power repeater you have much more possibilities for the operation of your LED light strips. Thus you increase the length of the operated LED light strips and are not bound to the technical limits of the LED controller.
If these two conditions are met, nothing stands in the way of extended operation:
Use of a LED controller (12V-36V) with PWM below 10KHz.
All light bands must have the same operating voltage as the power supply unit
Four channels usable
The power repeater supports with 4 channels á 5A maximum Color & White. However, each channel is "self-sufficient" and could also be used to amplify 4 white LED strips.
The maximum assignment of the channels depends on the LED light strip used. Depending on the coupled remote control, the maximum assignment looks as follows:
| LED light strip | Number of connections |
| White | 4 x |
| Ambience (duo-white) | 2 x |
| Color (RGB) | 1 x |
| Color & White (RGBW) | 1 x |
Strong signal reproduction
The iluminize power repeater analyzes the applied PWM signal for each of the 4 channels and outputs it amplified together with frequency and pulse width at the corresponding output. This makes it possible to synchronously control virtually any length of LED strip with one LED controller.
Connection via cable
The connection is made exclusively via 5-core cable to a central LED controller. This is done channel by channel and is possible with one or more power repeaters.
We also recommend connecting the LED light strips directly to the power repeater and not to the LED controller. This way, colors and brightness remain synchronous, uniform and very precise even when operating multiple power repeaters.
The power is decisive
The controller and power repeaters can be powered from a central power supply or from multiple power supplies. The voltage at the controller and the power repeaters should be the same and must correspond to the specific voltages of the LED light strips.
Small tip: The output power of the power supply should have at least 20% power reserve. For calculation you can divide the required power of the LED strips by 0.8.
Compatible helper
A big advantage is the compatibility with LED controllers of other manufacturers. Thus, our effective helper also cooperates smoothly with:
DMX
DALI
KNX
Homematic
etc.
Scope of delivery
In the scope of delivery you will find:
1x power repeater
1x instruction manual
Zuletzt angesehen
To install this Web App in your iPhone/iPad press 
and then Add to Home Screen.
