12V aluminium power supply Mean Well HLG A-series, IP65
Ideal for LED light installations: A sufficient power supply is essential for the use of illuminants. We offer the right power supplies for all cases, because as individual as a lighting is, as variable is the power requirement.
The Mean Well power supplies of the HLG series come in a robust aluminum housing and are protected against overload, overvoltage and short circuit. The design of the metal housing and the protection class IP65 allow an application both indoors and in the protected outdoor area.
Delivery and shipping costs details *
Currently no delivery date can be given.
Only pickup at our warehouse is possible!
No shipping rule found. Please contact our customer support.
We ship this product to the following countries (pickup for EU citizens of all countrys possible):
Choose the right power supply for your LED strip light
Function of a LED power supply: In order to operate an LED strip light or an entire LED light installation, you need the right power supply. Its primary task is to convert the 230V input voltage (house voltage) into a low-voltage DC voltage, e.g. into 12V or 24V, in some cases also into 5V, 36V or 48V.
Sufficient power and choosing the right voltage is essential when planning your lighting installation. For example, if you use a LED strip light with a 12V input voltage, you must use a power supply with an output voltage of 12V. When calculating the power, we recommend you to plan a safety reserve of at least 20%. Add up the power of all connected consumers and divide the result by 0.8. Example: Sum of all consumers = 130 W | 130 W / 0.8 = 162.5 W. A power supply unit of the next size with 185 W would be required.
Important! The power supply unit must be installed in a place in the ceiling or in the wall that can be inspected and that you can access at any time. Installation in an airtight place and/or surrounded by insulating material will cause the PSU to overheat and shorten its lifetime considerably. When reaching 80°C, the power supply switches off and on again in a short sequence to protect it from overheating. You will notice this as the LEDs flashing.
The connection of the power supply to the 230V power supply network must be done by a qualified electrician!
Reliable & Powerful Performance
even for more extensive lighting projects
The powerful and durable MeanWell HLG series LED power supplies are excellent for LED lighting installations.
Thanks to the high efficiency of up to 91.5% (depending on type) and the fanless design, the entire series can be operated with free air exchange at -40 ° C to + 80 ° C case temperature.
This HLG series has an integrated potentiometer for optional adjustment of current limit and output voltage.
Mean Well HLG 12V
The highlights at a glance
The HLG power supplies are of very high quality and robust construction. Their advantages are obvious:
Protection class IP65
Can be operated indoors and protected outdoors.
NOT suitable for use under water or in standing water (water accumulation, puddles, rain, etc.)!
Dimension correctly
Please calculate at least
20% safety buffer when operating without dimmer and
30% safety buffer when operating dimmers with pulse width modulation (PWM)
in your power supply selection. The power supply will thank you with a long lifetime.
Inrush current
Please note that an inrush current of up to 40A flows for a short time when the power supply is switched on electrically.
Several power supplies switched on at the same time may cause your fuse to blow.
Bildquelle: 1) © TZIDO SUN / Shutterstock.com
Choose the right power supply for your LED strip light
Function of a LED power supply: In order to operate an LED strip light or an entire LED light installation, you need the right power supply. Its primary task is to convert the 230V input voltage (house voltage) into a low-voltage DC voltage, e.g. into 12V or 24V, in some cases also into 5V, 36V or 48V.
Sufficient power and choosing the right voltage is essential when planning your lighting installation. For example, if you use a LED strip light with a 12V input voltage, you must use a power supply with an output voltage of 12V. When calculating the power, we recommend you to plan a safety reserve of at least 20%. Add up the power of all connected consumers and divide the result by 0.8. Example: Sum of all consumers = 130 W | 130 W / 0.8 = 162.5 W. A power supply unit of the next size with 185 W would be required.
Important! The power supply unit must be installed in a place in the ceiling or in the wall that can be inspected and that you can access at any time. Installation in an airtight place and/or surrounded by insulating material will cause the PSU to overheat and shorten its lifetime considerably. When reaching 80°C, the power supply switches off and on again in a short sequence to protect it from overheating. You will notice this as the LEDs flashing.
The connection of the power supply to the 230V power supply network must be done by a qualified electrician!
Reliable & Powerful Performance
even for more extensive lighting projects
The powerful and durable MeanWell HLG series LED power supplies are excellent for LED lighting installations.
Thanks to the high efficiency of up to 91.5% (depending on type) and the fanless design, the entire series can be operated with free air exchange at -40 ° C to + 80 ° C case temperature.
This HLG series has an integrated potentiometer for optional adjustment of current limit and output voltage.
Mean Well HLG 12V
The highlights at a glance
The HLG power supplies are of very high quality and robust construction. Their advantages are obvious:
Protection class IP65
Can be operated indoors and protected outdoors.
NOT suitable for use under water or in standing water (water accumulation, puddles, rain, etc.)!
Dimension correctly
Please calculate at least
20% safety buffer when operating without dimmer and
30% safety buffer when operating dimmers with pulse width modulation (PWM)
in your power supply selection. The power supply will thank you with a long lifetime.
Inrush current
Please note that an inrush current of up to 40A flows for a short time when the power supply is switched on electrically.
Several power supplies switched on at the same time may cause your fuse to blow.
Bildquelle: 1) © TZIDO SUN / Shutterstock.com
Zuletzt angesehen
To install this Web App in your iPhone/iPad press 
and then Add to Home Screen.
