Radio wall dimmer with rotary switch - the LED design compact behind a button

Control your LED light installations with our noble radio wall dimmers and tune your LEDs individually according to your wishes. Here you benefit from an intelligent rotary switch behind which a variety of smart functions slumber. The wall dimmer is suitable for the simple operation of LED light strips, LED built-in spotlights, LED panels and other dimmable lamps and lights.

Stepless dimming

The light can be switched on or off via the rotary knob and the brightness can be freely selected between 0.1% and 100%. You can dim all three colors brighter or darker at the same time. Once you have found your perfect light intensity, you can save it permanently.

Personal color mix

Create a feel-good oasis with your own color accents and bring warmth into your living space in an artistic way. By turning the rotary knob, you can intuitively determine your desired color. Fresh and pleasant mixed colors are created with a mix of RGB. The color setting is synchronized and with any number of LED systems in one zone.

Good to know: This wall remote control is NOT suitable for Color & White light strips and lamps, as it does not support the control of white LEDs!

The used wall dimmer decides dynamically during use in which operating mode the radio controller or DMX decoder works.

Memory function

Switching on/off is slightly delayed without flickering and is therefore easy on the eyes. Each time the device is switched on, the last set lighting situation is restored.
 

Sufficient range

The operation with a wireless controller is guaranteed thanks to the decent range. This is depending on the condition of the room up to 20m and thus allows flexible lighting control. The wall dimmer operates in the approved frequency band 868 MHz and is powered by batteries.

Available functions

The LED design by radio offers you many advantages and possibilities. Thanks to the right combination of LED controller and this wall dimmer, no wishes remain unfulfilled. However, there are also limitations that need to be considered:

5048.1 Radio wall dimmer with rotary switch for white LEDs

5048.2 Radio wall dimmer with rotary switch for Ambience LEDs

Dim = with dimming function / sw = switch on and off / W-Mix = mixing of white tones

Rounded in noble plexiglass

Our radio wall dimmer with rotary switch scores visually with its timeless design and robust construction. What used to be done as an annoying habit at the simple light switch, now turns out to be a stylish and pleasant lighting design. The round aluminum knob gives you user-friendly access to all functions.

The iluminize radio system

To dim or switch your LEDs, the wall dimmer must first be paired with a compatible wireless controller. Thus, the wall dimmer communicates as a radio transmitter with the LED controller and can be operated with up to 8 radio controllers in parallel.

Installation & scope of delivery

The wall dimmer is battery operated and therefore does not require a power connection. The included batteries have a long lifetime (up to 2 years) and are easily replaceable. Please remove the protective foil under the battery before putting it into operation. Given the protection class of IP20, operation is intended for indoor use only.

It is designed for wall mounting and can also be installed in common flush-mounted switch boxes. Due to the outer dimension of 86mm, it is not suitable for mounting in multiple flush-mounted boxes in standard spacing, also not in combination with standard switch frames.

In the scope of delivery you will find:

• 1 x radio wall dimmer
  

• 1 x battery (button cell CR2032 / 3V)

• 1 x instruction manual

• 2 x Schrauben