This 2-pole connector acts as a perfect waterproof bridge and helps to safely connect white LED light strips with IP67 outdoors. Even in humid environments with splashing water, an isolated connection is guaranteed at all times, thanks to the dense design.

The connection is simple and quickly done without additional tools. Feed the cables through the cable outlet of the outer sleeves on both sides by first loosening the hex nuts (M16) and the threaded sleeve. Then fix the cable ends in the connector with a screw clamp and screw the parts together again.

Up to 2 conductors (0.5-1mm) can be mounted, but not NYM conductors. The maximum load capacity is 450V / 24A and must not be exceeded.

The connector is also recommended as a socket sleeve and is also used in the installation of LED spotlights as well as home lighting.
.