Radio wall dimmer with buttons - the smart light switch for white LED installations

Our wall dimmers bring your lighting ideas to life in a simple way with just a few clicks. Design your light very easy and user-friendly thanks to our radio wall dimmer with buttons. The operation is self-explanatory and the installation is done quickly. The pure white light switch brings a lot visually and also makes a good figure in common standard switches.

Stepless dimming

Pressing the rocker switch turns the white LED light on or off. The dimming process is performed when the switch is on and by pressing it for a long time and regulates your lights between 0.1% and 100% brightness. Synchronous dimming is infinitely variable and can be performed by any number of LED systems.

The perfect white tone

Find your ideal mixed white and choose between warm, neutral and cool white. This function is ideal for all dimmable Ambience (duo-white) LEDs and sets them perfectly in scene for a pleasant ambience.

Controllable in 1 or 2 zones

The control is possible synchronously as well as individually for up to 2 zones. So you can control single zones separately or all zones at the same time. Integrate any number of LED systems per zone and operate them synchronously.

The used wall dimmer decides dynamically during use in which operating mode the radio controller works.

Memory function

Switching on/off is slightly delayed without flickering and is therefore easy on the eyes. Each time the device is switched on, the last set lighting situation is restored.

Generous range

The operation with a radio controller is guaranteed thanks to the decent range. This is up to 20m depending on the nature of the room and thus allows flexible lighting control. The wall dimmer operates in the approved frequency band 868 MHz and is powered by batteries.

Available functions

LED design by radio offers you many advantages and possibilities. Thanks to the right combination of LED controller and this wall dimmer, no wishes remain unfulfilled. However, there are also limitations that need to be considered:

5040.111 Radio wall dimmer with buttons for white LEDs

5040.121 Radio wall dimmer with switches for Ambience LEDs

Framed in plexiglass

The wall dimmer impresses with a pure white frame made of robust Plexiglas. With its rounded edges, it looks elegant and stylish and cuts a fine figure on walls and other surfaces.

The iluminize radio system

To dim or switch your LEDs, the wall dimmer must first be paired with a compatible wireless controller. Thus, the wall dimmer communicates as a radio transmitter with the LED controller and can be operated with up to 8 radio controllers in parallel.

Installation & Mounting

The wall dimmer is battery operated and therefore does not require a power connection. The included batteries have a long life (up to 2 years) and are easily replaceable. Please remove the protective film under the battery before commissioning. Given the protection class of IP20, operation is intended for indoor use only.

Our radio wall dimmer can be easily glued or screwed on surfaces with the included 3M sticker. It can also be easily mounted on standard flush-mounted boxes. The inner part can be removed from the frame and inserted into one of the following standard switches.

Scope of delivery

With the delivery you get:

• 1 x wall dimmer

• 1 x plexiglass frame

• 1 x inner plate

• 1 x mounting plate

• 1 or 2 switching paddles

• 1 x battery (button cell CR2032 / 3V)

• 1 x 3M sticker

• 2 x screws

• 1 x instruction manual