Radio wall dimmer Touch R - the visual playground with direct connection to 230V

Control your LED light installations with our noble radio wall dimmers and make your own light ideas visible for everyone. Here you benefit from a user-friendly interface behind which a variety of smart functions slumber. The wall dimmer is suitable for the operation of LED light strips, LED built-in spotlights, LED panels and other dimmable lamps and lights.

Stepless dimming

The brightness can be freely selected between 0.1% and 100% via the dimming icon. You can dim all three colors brighter or darker at the same time. The brightness only changes for the three colors. Once you have found your perfect brightness, you can save it permanently.

Personal color mix

Create a feel-good oasis with your own color accents and bring warmth into your living space in an artistic way. The individual color of the LEDs per zone is set by selecting a mixed color in the touch-sensitive touch color wheel. Optionally, the color mix works with the help of the separate control panels R G B W for the individual colors red, green, blue and white. A colorful variety is offered by 10 pre-installed color change programs, whose sequence speed is adjustable and only available for the Color & White variant.

Up to 4 zones controllable

The control is possible synchronously as well as individually for up to 4 zones. Thus you can control single zones separately or all zones at the same time. Integrate any number of LED systems per zone and operate them synchronously.

The wall dimmer used decides dynamically during use in which operating mode the radio controller or DMX decoder works. 

Memory function

Switching on/off is slightly delayed without flickering and is therefore easy on the eyes. Each time the device is switched on, the last set lighting situation is restored.

Permanently set in scene

Record your individual ambience and save your configuration as a light scene. Up to 4 light scenarios per zone can be stored permanently and can be called up or adjusted at any time.

Sufficient range

The operation with a wireless controller is guaranteed thanks to the decent range. This is depending on the condition of the room up to 20m and thus allows flexible lighting control. The wall dimmer operates in the approved frequency band 868 MHz and receives its power supply via cable.

Available functions

LED design by radio offers you many advantages and possibilities. Thanks to the right combination of LED controller and this wall dimmer, no wishes remain unfulfilled. However, there are also limitations that need to be considered:

5046 radio wall dimmer touch

Rounded off in noble glass

Our radio wall dimmer Touch scores visually with its timeless design and a backlight. What used to be an annoying habit at the simple light switch, now turns out to be a stylish and pleasant lighting design. The glass surface gives you user-friendly access to all functions via touch function. The radio wall dimmer is available in white and black. 

The iluminize radio system

To dim or switch your LEDs, the radio wall dimmer must first be paired with a compatible radio controller. Thus, the radio wall dimmer communicates as a radio transmitter with the LED controller and can be operated with up to 8 radio controllers in parallel. Here our radio universal controllers (see table) with 4 channels are suitable for the operation of Color & White.

Installation & scope of delivery

The radio wall dimmer Touch R is connected directly to 230V and therefore requires neither batteries nor drivers. Given the protection class of IP20, the operation is intended only for indoor use.

It is intended for wall mounting and can also be installed in common flush-mounted switch boxes. Due to the external dimension of 86mm, it is not suitable for mounting in multiple flush-mounted boxes in standard spacing, also not in combination with standard switch frames.

In the scope of delivery you will find:

• 1 x radio wall dimmer Touch R

• 2 x screws

• 1 x instruction manual